Many people strive to have beautiful hardwood floors in their homes, which may require refinishing your current parquet floor. Sanding hardwood floors is a necessary step in any project, but it takes more time and effort than most people realize. Grinding takes time; The rush can physically exhaust you and even damage the floor.
Sanding and restoring hardwood floors yourself will certainly save you money. Once you’ve mastered the basics, patience is more important than anything else to get the perfect floor finish. Even the experts in this industry can do the job for you. Not only do they do it right, but they save time and effort by getting it done on time. If you want to install new hardwood floors quickly, make sure you hire professional contractors in your area.
But since the grooves between the boards are smoothed out to prevent tripping, appearance matters. Your floor will be a beautiful piece of work when you’re done, something to be proud of and something to brag about, but as soon as your kids or dog walk into the room, it’ll revert to being a hardwood floor that you scrub or vacuum once a week. week.
Have you always wanted to repaint your parquet floor but are afraid to sand it? You can restore your floors without the hassle of sanding.
Remove the base shoe
The lower half of the crown bar is called the base shoe. All baseboards in the room must be carefully removed. It must be removed so as not to accidentally scratch it; Upon completion of work, reinstall it.
Clean the floor
Do your best to remove stains with a professional floor cleaner. Pet stains are usually irreversible, so in most cases, you won’t be able to get them off the floor.
Familiarize yourself with your floor sanding equipment
To do most of the work yourself, you’ll need to rent a drum sander. You will also need to hire a trimmer to finish the corners and sections around the wall.
Prepare the room
This stage is all about doing the obvious things like B. removing all furniture, discarding plastic, driving protruding nails into the wall, lifting overhead light fixtures, etc.
Start Sanding the Area
Sanding can be started with the drum sander. Try to keep the pressure constant as you move from left to right. Never leave the grinder unattended as this could cause burns to the floor.
Once the main area of the room is nice and smooth, use the trimmer to finish the floor along the walls. Even though this tool looks easy to use, it will take some effort to master it. Move smoothly and try to keep your balance.
Shave the corners
Start by working the corners with a carbide scraper to remove any old paint.
In addition to cleaning after sanding, you should also clean between sanding. Be sure to clean if going from a 40 grit to a 60 grit, for example. If you don’t, you could end up scratching the floor a lot.
That’s all you need to know about grinding. At this point, you’re ready to check, polish, and finish the rest of the floor.
Sanding parquet: how long does it take?
With regards to sanding hardwood floors, this is one of the most often posed inquiries by mortgage holders. Since most people don’t know how long it will take, they ask this so they can plan. Due to insufficient preparation, they had to postpone the project.
A variety of variables determine how long it takes to polish a floor. There are many factors to consider, including who is responsible for the project, the size of the room, the type of finish plaster, and the nature of the flooring.
While it might seem obvious, the bigger the room and the more rooms you have, the longer it will take to sand the floor. With an open floor plan, you can finish sanding a large area much faster than if the space were divided into several smaller rooms.
Depending on the condition of the floor, sanding may be required. A contractor who specializes in installing and repairing hardwood floors says so. If your surface is badly scratched, sifting or polishing may be enough to eliminate it.
To get the floor back to a flat, clean surface, you’ll have to remove a lot more material if it’s uneven. You can make it uneven, but you would need to use a hand sander to smooth out the indentations. It won’t save you time. This category includes floors with cups.
A good example of this would be when the wood finish has faded over time and turned gray over time, which is likely due to the wood’s natural tendency to fade.
If the old paint is covered with it, it may take longer to remove. Similar to UV damage, this one also penetrates very deeply but is caused by the proximity of water and air. You also have to sand it well to get it clean.