When you’re a busy parent, it’s not always possible to solve plumbing problems on your own. The good news is that there are ways to solve a plumbing problem without asking for help. Follow these steps and your grass game will soon be back on track.
The first step in getting rid of clogged drains is identifying the problem. Is a toilet overflowing? A sink that doesn’t drain evenly? Or maybe an outside pipe that collects wastewater on your property? You can usually identify the source of a failure by finding the source. If that’s not possible, you should call a plumbing company for assistance and have someone unclog the drains.
With so many different types of plumbing problems, it can be difficult to know where to start for help. Fortunately, we’ve put together this article trying to explain how to fix common plumbing problems without needing an expensive technician or plumber to replace your pipes.
Check blockages with a plunger
Many blocks are made up of several pieces of different types of tubes blocking each other. Before you solve a plumbing problem, it’s a good idea to call a Guelph Company plumbing repair company first and ask them to fix any blockages in your pipes.
Some blockages are easy to spot because they have small plastic plugs. When these blockages are located, you can usually clear them by removing the plastic plugs and discarding them. If the clog is still evident after this, you should consult a plumber.
Turn off the water in the main sewer line
As mentioned above, blockages can form in the pipes that carry water from your home to the outside. To prevent clogs, turn off the water supply to the sewer line when not in use and perform maintenance tasks such as cleaning the interior of your home or installing a trash can under your kitchen sink. You can also buy an extendable cutting board or cross-cut saw to help unclog pipes. Be sure to clean the saw before using it to avoid cutting yourself.
Know where plumbing pipes come from and how they are connected
Plumbing pipes come from a network of pipes called the main sewer line. The sewer line runs through your house and empties into a large plastic drain pipe called a sewer system. At the opposite end of the sewer line is a “backup” sewer line. The “backup” line is usually contained in a larger pipe called a water heater, sometimes with a sewer connection near the end.
The water heater can also be the source of your plumbing problem. Leaking water heaters can easily back up into your home and cause flooding. If a flood occurs, contact your home plumber immediately to fix the problem.
Crash test
If your main sewer line is clogged, you can also try using a plunger to unclog it. A plunger is a small device inserted into the tube to clear blockages. After successfully cleaning the plug, remove the plunger and make sure it is clean. A clog is often caused by debris or theoretically trapped tree roots. When this happens, your water will be cloudy while your pipes are still full of water. In that case, you need to call a plumbing company to unclog the drains.
Using a shovel to unclog a drain
If your plumber is unable to clear the clogs or if this article helped you but you still have a clog, try the following method first. If it works and you’re still having trouble unclogging your drains, then you need to call a plumbing technician to resolve the issue. The following tip can help you discover a haunted house. Put a brick or two down the drains that lead to your house. If it works, the blockage is in the drain, not the pipes.
Conclusion
As the holidays approach, lockdowns are a common problem for many parents. Fortunately, there are ways to solve the problem without having a plumber or plumber come to fix the pipes. Follow these steps and your grass game will soon be back on track.
